Go here for details on the construction of Pac-Mamea!
DESIGN = CONSTRUCTION = ARTWORK = HARDWARE = SOFTWARE = DOWNLOADS

powerpill.gif (949 bytes) PARTS LIST powerpill.gif (949 bytes)

 
A few of people have been pestering me for this, so here it is!
BTW, this list was compiled according to my best recollection, since all the parts are now a living and breathing part of the cabinet, and so are not easily counted, measured, or inventoried.  Since I didn't keep receipts for this stuff, I don't have prices or even names for some of the parts!  Don't blame me, I've already done most of the work for you...

 

Building materials: (purchased at Home Depot unless otherwise noted)
  • 3X - 4x8' sheets 3/4" black melamine - lumberyard (outside of cab)
  • 1X - 4x8 sheet 3/4" plywood - lumberyard (inside and bottom of cab)
  • 2X - 4x8 sheet Wilsonart laminate - lumberyard (D341-60 Marigold)
  • 2x - 50' roll iron-on melamine edging (black) - lumberyard
  • 1 gallon Formica contact cement (lumberyard)
  • 1X - 30x40" sheet 1/8" Lexan (control panels)
  • 1X - 30X40" sheet 1/4" Lexan (monitor and marquee)
  • 2X - 5" Vinyl Door Knob and Wall Shield (locking plates)
  • 6X - Roller Latches 
  • 1X - 10' length of marquee retainer - Happ Controls
  • 2X - 20' rolls T-molding - www.t-molding.com
  • 3X - #8 x 1 1/2" wood screws box of 100
  • 8X - 1/4" x 1 1/2" carriage bolts (coin door / security bar)
  • 8X - 3/8" x 1 1/2" hex bolts (front swivel casters)
  • 2X - 3" cabinet wheel assembly (L-shaped bracket) - Happ Controls
  • 2X - 4" heavy duty swivel casters w/lock
  • 3X - 36" continuous hinge (piano hinge) (front door and hinging panels)
  • 1X - 3' length aluminum vanity mirror clip (bezel glass)
  • 3X - window screen clips (bezel glass)
  • 4X - Hidden hardware cabinet hinges (rear door) - contractor's warehouse
  • 6X - 6' length of 1x1" pine - True Value
  • 1X - 6' length of 1x2" pine
  • 1X - 12' length of 2x4" pine
  • 2X - 16 oz bottle urethane wood glue
  • 3X - cabinet key locks
  • 2X - 5" speaker grilles - Radio Shack
  • 2X - Power strips - Radio Shack
  • 1X - USB hub - Fry's Electronics
 
Arcade Parts and Electronics:
  • 1X - PC with AMD Athlon 700mhz / 512mb PC100 RAM / Geforce2 MX Video Card
  • 1X - 21 inch Panasonic Television
  • 1X - Set of Creative Inspire T2900 2.1 ch speaker system
  • 1X -  Ultimarc I-PAC 28-input encoder
  • 1X -  Oscar Pro spinner
  • 1X -  Ultimarc Optipac optical interface
  • 1X - Genuine arcade coin door (Ebay)
  • 2X - Genuine Terminator 2 analog guns (with working recoil) (Ebay)
  • 1X - Genuine Star Wars flight yoke (Ebay)
  • 1X -  Ultimarc E-stick joystick
  • 4X - Happ Super 8-way joysticks
  • 5X - Happ Small Round Illuminated pushbuttons
  • 23X - Happ Horizontal Pushbuttons
  • 1X - 3" Crayola Kids PC trackball (a.k.a. KYE Kidsball)
  • 3X - MS Dual Strike gamepads (for T2 and yoke hacks)

 

Artwork

 

DESIGN = CONSTRUCTION = ARTWORK = HARDWARE = SOFTWARE = DOWNLOADS

Go here for details on the construction of Pac-Mamea!
 

The information on this site is for the purposes of education and entertainment only.  The owner of this site makes no warantees as to the accuracy of the information, and takes no responsibility for any damage or injury sustained due to the use of information herein.  The design of the Pac-Mamea cabinet and all photos, computer renderings, drawings, schematics, and printed information relating to such are Copyright 2002-2004 Robert Meyers.  No ownership of other copyrighted material found on this site is implied.